Chapter Contents | Introduction | Authors | References
Table of Contents | Index | Previous Section | Next Section
The double-detection mode was the most common mode of seconds-confirmation.
A combined test on flux and position was applied which consisted
of a two-degree-of-freedom χ2 test. The nσ
position discrepancy
contributed one of the degrees of freedom, and the discrepancy
in the log of the two fluxes in units of the log-flux standard
deviation provided the other. A threshold value corresponding
to sacrificing one real event out of every hundred thousand was
used for this test for unconfused cases, and one corresponding
to sacrificing one real source in a million was used for cases
which had been processed for confusion before arriving at this
point. If this test failed, the drop-dead fell back to rejection
processing as described above; otherwise parameter refinement
was performed for the flux and position (see below), and the next
detection was processed.
Chapter Contents | Introduction | Authors | References
Table of Contents | Index | Previous Section | Next Section