Sticking the foam cone supports together.

The infamous glue that spent several days in Paris and then Santiago...

The specialised glue packaging ... hmmmm....

Mike attempting to glue and align part of a foam cone.

Lots of foam cones.

Setting a completed cone support into an antenna.

Making sure the cone support is well stuck down.

Assembling the alignment jig.

Cutting the top of the cone - flat, straight and ready to hold the secondary mirror.

Another image of cutting the top of the cones...this is the hardest part

Filing the end of the alignment column so that it fits tightly.

Inserting the alignment column.

The alignment jigs in place and ready to glue on the secondary.

Carefully lowering the secondary onto the foam supports.

Everything in place - just waiting for the glue to set... repeat 12 more times!

Four antennas ready to go.